Anhui Color Sort Technology Co., Ltd.

Precision and High speed CCD Color  Sorters for distinguishing products via color selection.

About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Company News
Home News

Color sorter maintance

I'm Online Chat Now
China Anhui Color Sort Technology Co., Ltd. certification
China Anhui Color Sort Technology Co., Ltd. certification
Machine is good for peanut kernel with skin and roasted peanut.

—— Vipul Patel

Sorting Pulse and beans seems ok.Will buy another set.

—— Eri Looy

we bought the color sorter for rice last year, the sorting result is very good, they also send engineer to provide the best after-sales service, tks

—— Chris Adam

Company News
Color sorter maintance


Deash brush

Clean dusts on the rubber strip of the deash brush once a week by ash gun; check the deash brush once a month, if any loose, tighten it. Correct the rubber strip if it cannot operate steadily.

Dedusting for sorting cabinet 
If any dust found on the glass inside the sorting box, rub and remove it with clean soft cloth soaked with alcohol, and check if dust wiper works normally. Start machine only after glass surface completely dried and cleaned.

Sewage discharging for filter and replacement of filter element 
Sewage discharging for filter
Ambient temperature around the machine should be maintained at 0-40.
In places with night temperature may lower than 0, residual fluid inside the air compressor and air filter shall be removed after shutdown of machine. With the water discharging function, the air compressor and oil-mist separator will automatically discharge water when it reaches to certain height, while it would be difficult to discharge water as the water discharging port will be frozen when the temperature is below 0. Thus, it is required to discharge water manually.
If operate the machine with the compressed air temperature lower than 0, air supplied for the air filter and oil mist separator shall be dried by the air drier as the moist air would frozen the internal filter element, which hampers the air flow and cause damage to the filter element.

In-service inspection
During the operation, inspect the signal indication (including the work instruction, alarm indication) and spray valve operation; inspect the pressure of air compressor and its sound, with water discharging at least one time every 8h. 

Maintenance after operation
Clean the feeder (especially the coagulation inside the feeder hopper), interior of the machine, material-receiving hopper and ash removing brush by air gun.
Note: it is forbidden, in cleaning the material-receiving hopper with air gun, to blow the nozzle directly with air gun, which will cause damage to the nozzle valve.

Regular maintenance and inspection
1Monthly: check the filter element and the cleanliness of the ash removing brush. 
2Quarterly: check the fluorescent lamp.
3Half a year; check or replace lubrication oil for the compressor at least one time.
Warning: in order to prevent static electricity and ensure the personal safety, the host machine and its attached equipment shall be in good ground connection. Electric cabinet opened by professional only. It is forbidden to open the rear case cover of the cabinet in operation as it is a fully enclosed automatic cycle air cooling system.




Pub Time : 2014-01-20 14:49:35 >> News list
Contact Details
Anhui Color Sort Technology Co., Ltd.

Contact Person: Mr. Roy Guo

Tel: +86-551-63714288 , 13865971478

Fax: 86-551-63475038

Send your inquiry directly to us